Connect To Other Wlan Networks; Bluetooth; Turn On Bluetooth Or Set So The Phone Can Be Detected; Matching And Connecting Bluetooth Headset - Vortex MATRIX User Manual

4. Touch one of the WLAN networks to connect. When you select an open network,
the mobile phone will automatically be connected to the network. If the network you select
is a WEP, or WPA/WPA2 encrypted network, you must first input a corresponding
password, and then the touch connects.
3.5.2

Connect to other WLAN networks

1. Wireless and network on the screen, touch the WLAN settings. Find WLAN
networks will be displayed in the WLAN network list.
2. Touch other WLAN networks can be connected to the network.
NOTICE: In addition, the mobile phone via GPRS Internet. GPRS SIM card in our current
default boot is open, the user can manually select the specific location in "Settings -> SIM
management -> Data connection, touch "Data connection" to close the current SIM card
data connection.
3.6

Bluetooth

3.6.1 Turn on Bluetooth or set the phone can be detected
1. Press the Home key, click on Setting
2. Click on "Wireless & networks", Then Select "Bluetooth" check box, to open
Bluetooth. The phone will automatically scan can be used a wireless network. After open,
the status bar will appear Bluetooth
for Bluetooth devices within range.
3. Touch Bluetooth Settings, All the equipment will show up in Bluetooth devices list
below.
(Select the check box can be detected, the phone is set to be detected, so that within the
scope of other Bluetooth devices can find the phone.)
Important: cell phones can detect the longest time for two minutes.
3.6.2

Matching and connecting Bluetooth headset

1. Press the Home key, click on Setting.
2. Click on "Wireless & networks" -> Bluetooth Settings, Then Select Bluetooth check
box, to open Bluetooth. Then your phone to scan within the scope of the Bluetooth, and will
all find to device display in Bluetooth device list below.
Equipment found below in the list of Bluetooth devices.
3.6.3 Interrupt and the Bluetooth headset connection
1. Press the Home key, click on Setting -> Bluetooth Settings.
2. In the list of Bluetooth devices, touch or tap and hold hands-free headset is
connected.
3. Long press and select "Disconnect & un pair".
4.1

Browser

Click the browser icon to open the browser. In the browser, you can open the page by
the following methods:
1. Click on the browser address bar, input the web site URL.
). Touch the "Scan for devices" will begin to scan

4 Application

6