Keyboard; Mouse - AV Stumpfl UHD Player Manual

In the Web Interface, click on [ADVANCED SETTINGS] in the
DEVICES]. The drop-down menu will open and the settings for the peripheral devices will appear.
Peripheral Devices settings in the Web Interface
Fig. 59:
Click the field below [USB Device], choose your presenter from the drop-down list and click [Apply
Settings].
PLEASE NOTE:
While the UHD Player shows its Web Interface, the presenter's buttons as mentioned above are
without function. In this state, the presenter acts as a mouse device: The pointing stick in the
middle moves the mouse pointer and the button on the back-side executes a left-mouse-click.
Insert the data carrier into the player, or if it is already plugged in, toggle the display back into
playback mode using the keyboard shortcut [CTRL+F5] or [CTRL+S].

14.3.3. KEYBOARD

Connect a keyboard to one of the
functions can be activated by executing the corresponding keyboard shortcut.
Keyboard Shortcut
Ctrl+F1 Ctrl+E
Ctrl+F2 Ctrl+F
Ctrl+F3 Ctrl+U
Ctrl+F4 Ctrl+D
Ctrl+F5 Ctrl+S
Ctrl+F12 Ctrl+R
The keyboard shortcuts are also listed in the player's Web Interface on the "System" page.

14.3.4. MOUSE

The complete configuration of the UHD Player via the
Simply connect your mouse to one of the
then remove the data carrier from the player (or press Ctrl+S if a keyboard is also attached), then the
Web Interface will appear.
You may browse through all functions, like you do when connecting to the player's Web Interface via
your internet browser. An on-screen keyboard will open when text fields need to be edited.
USB peripheral ports
Function
Toggle Auto EDID
Set Resolution to 1920x1080p60
Set Resolution to 3840x2160p60
Toggle DHCP
Toggle Settings / Playback
Load Default Configuration (press for 5 Seconds for a factory reset)
USB peripheral ports
menu bar and then on [PERIPHERAL
on the UHD Player's right side. The following
Web Interface can be done using a mouse.
on the UHD Player's right side and
75