Getting Started - Humanware explore 8 User Manual

GETTING STARTED

1. Connect the USB cable to the USB charger.
2. Hold explorē 8 so that the screen side is
facing you. Make sure the tactile USB
symbol on the cable's USB connector is on
the opposite side of the screen. Carefully
connect the cable to the USB port located
on the left side of your device and plug the
charger into an outlet.
IMPORTANT: Use caution while inserting
the cable into the USB port.
3. Let your device recharge until your battery
is full. The device will become warmer
during the charge – this is normal.
4. Once the device is fully charged, carefully
disconnect the cable.
5. Press Power or unfold the reading stand to
start using the device.
6