User Manual
4.4
Inserting and changing the battery
Danger!
Technical data subject to change without notice.
Issue 01/2010
Pegasus 70xx series
Charge and change battery only in an area known to be non-hazardous. Use only
BARTEC Models what are listed in chapter "3.4 Health and Safety recommendations"
for charging and communication or equivalent.
Turn your Pegasus Off before you change the battery
Loosen the screw (type K20x8 WN5452-Torx-1) on the belt clip
Remove the belt clip as described in chapter 4.3.
Lift the battery cover off the position marked red in figure 11.
Insert or remove the battery from the battery door.
Close the battery door
Fasten the belt clip as described in chapter 4.3.
Figure 11: Pegasus 70xx battery cover
Figure 12: Pegasus 70xx without battery cover
Page 19 of 44