Table of Contents
Advertisement
User Manual
6
Maintenance, Inspection, Repair
Caution!
Technical data subject to change without notice.
Issue 01/2010
Pegasus 70xx series
Only trained and qualified personnel may commission and do maintenance work on the
Pegasus 70xx series! Trained qualified personnel are people who are familiar with the
installation, assembly, commissioning and operation of the Pegasus 70xx series, have
been instructed about the risks and have the appropriate qualifications by virtue of the
work they do.
Maintenance intervals
The mechanical status of the devices should be checked at regular intervals. The length
of the maintenance intervals depends on the ambient conditions. We recommend
checking at least once a year. Regular maintenance is not necessary if operated
appropriately in conformance with the installation instructions and with due consideration
to the ambient conditions.
Inspection
Under IEC 60079-19 and EN 60079-17, the owner/managing operator of electrical
installations in hazardous areas is obliged to have these installations checked by a
qualified electrician to ensure that they are in a proper condition.
Servicing
Adhere to the applicable regulations under Directive 99/92/EC, IEC 60079-19 and IEC
60079-17 when servicing, doing maintenance work on and testing associated operating
equipment!
Assembly/disassembly, operating and maintenance work may be done only by trained
specialists. The statutory rules and other binding directives on workplace safety,
accident prevention and environmental protection must be observed.
Observe the national waste disposal regulations when disposing of the equipment.
Instructions for Repairs
If you wish to send in a defective device for repair, please read the RMA procedure
guidance first. Then fill in and sign the RMA (Return Merchandise Authorization) form
and send it to our "Retouren Center".
Email:
services@bartec.de
We cannot guarantee any contractually agreed processing times for devices that are
sent in without an RMA number.
The RMA guide and the RMA form are available on our homepage for downloading.
http://www.bartec-group.de
Have you any questions? Write us an e-mail or call us.
E-mail:
services@bartec.de
Fax:
+49 7931 597-119
Quality and culture
RMA form
Phone:
+49 7931 597-444
Page 33 of 44
Advertisement
Table of Contents
