Changing the Volume
1. Start a dialogue by pressing the Voice Command
button.
2. Say a command (e.g., "Help").
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice Com-
mand system is speaking. Please note the volume
setting for Voice Command is different than the audio
system.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175
Starting Voice Recognition (VR) Session in
Radio/Player Modes
In this mode, you can say the following commands:
NOTE: The commands can be said on any screen when a
call is not active after pushing the Uconnect® Voice
Command
button.
Disc
To switch to the disc mode, say "Change source to Disc."
This command can be given in any mode or screen:
• "Track" (#) (to change the track)
3