IKEA GRÄNSLÖS Installation Instructions Manual page 14

ENGLISH
Clock function
DURATION
END
TIME DELAY
MINUTE MINDER
00:00 COUNT UP TIMER
Setting and changing the time
After the first connection to the mains, wait
until the display shows
"12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set the
minutes.
The display shows
"00" flashes.
3. Press or to set the current minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press
and again until the indicator for the time of
day flashes in the display.
To set how long the appliance operates. Use only when
an oven function is set.
To set when the appliance deactivates. Use only when
an oven function is set.
To combine DURATION and END function.
Use to set a countdown time. This function has no effect
on the operation of the appliance. You can set the MI-
NUTE MINDER at any time, also if the appliance is off.
If you do not set any other clock function the COUNT UP
TIMER automatically monitor how long the appliance
operates. It is on immediately when the oven starts to
heat.
The Count Up Timer cannot be used with the functions:
DURATION, END, core temperature sensor.
and "12:00".
and the set hour.
again
Application
Setting the DURATION function during
cooking function
1. Press again and again until
to flash.
2. Press or to set the minutes and
then the hours for DURATION time.
Press to confirm.
When the time ends an acoustic signal
sounds for 2 minutes.
flash in the display. The appliance
deactivates automatically.
3. Press any button or open the oven door
to stop the acoustic signal.
Setting the END function during cooking
function
1. Press again and again until
to flash.
2. Press or to set the hours and then
the minutes for END time. Press
confirm.
14
starts
and time setting
starts
to