Installation Of The Bluetooth Tie-In; Bluetooth-Pc Tie-In - Handy Tech Basic Braille User Manual

Basic Braille
Installation
You can choose the following components of the software, to be installed:
 JAWS driver: latest Braille display driver for JAWS for Windows
 Window-Eyes driver: latest Braille display driver for Window-Eyes
 HAL/Supernova driver: latest Braille display driver for HAL/Supernova
 User manual: this user manual.
We recommend that you use the default setting for the installation. All required software
components will be installed. After completion of the installation program you will find a
group named "Handy Tech" in programs in the start menu. Here you find the following
subfolders:
 BrailleDriver: here you find the key settings of your Basic Braille for your screen
reader and the configuration program for the Braille display driver.
 Basic Braille: Here you find this user manual and the uninstall program.
After installing successfully you can hook on your Basic Braille on to your computer.
2.3

Installation of the Bluetooth Tie-In

If your Basic Braille features a Bluetooth transmission module, you can also establish a
wireless connection between the Basic Braille and a computer or a cell phone, if they are
equipped with wireless Bluetooth technology. You need to make sure that the wireless
Bluetooth interface on your Basic Braille is active, by enabling the option "Bluetooth on" in
the configuration menu like described in chapter 3.4 Configuration Mode. The wireless
transmission radius is approximately 10 meters (10 yards or 33 feet).

Bluetooth-PC Tie-In

1. Please make sure, that the Basic Braille is switched on and the Bluetooth function
in the configuration mode is enabled.
2. Select "Bluetooth Devices" from the control panel or from your system tray and
press the context menu key.
3. Select the "new device/connection" item
4. "Add Bluetooth Device Wizard" will appear.
5. All detected Bluetooth devices will be listed. Select the Basic Braille from the list
and press "Next".
6. Normally the PC will create a pairing code which you accept by pressing "Next".
7. Now the pairing will be done and the needed drivers will be installed. Please wait a
moment. Please confirm by pressing "Finish".
Your Basic Braille now has a wireless connection to the PC, and you can utilize all of its
functions, as if it were connected via the USB cable.
Note: If you move the Basic Braille beyond the Bluetooth connection's communications
radius (10 meters/yards), the connection to the PC will be interrupted. The connection will
automatically be re-established by Handy Tech's Braille device driver once you move back
within range. For this you need to have installed the latest Braille display driver (see
chapter 2.2 Software Installation).
Handy Tech
Elektronik GmbH
Seite 5