Section 2 Disassembly - Sony MDR-RF845R Service Manual

Note :
Follow the disassembly procedure in the numerical order given.
2-1. RX-BASE BOARD
Precaution for installtion
1 Slide the suspender in the
direction of the arrow.
Suspender
SECTION 2
DISASSEMBLY
1 Five screws (P 2
8
Claw
6 Button, tuning
2 Set the psuh
switch (1 key).
— 3 —
× 6)
Cover (R), hanger
q; Switch, push (1 key)
9 Remove the two solderings.
7 RX-BASE board
5
4 Screw (P 2
3 Remove the
nine solderings.
Precaution for installtion
No.205
No.203
No.204
No.203 (black)
Solder the each lead wires directly to the position as shown
while being cautions of colors.
2
Claw
× 8)
RX-BASE board
No.204
No.201
No.201 (green)
No.202
No.202 (red)