Kyocera FS-C2026MFP Operation Manual page 63

Use the procedure below to setup the TCP/IP (IPv4) setting.
Login User Name: L b
********************
Login Password:
Sys. Menu/Count.: a b
1
Report
2
Counter
3
*********************
System
Administrator only.
System:
1
*********************
Network Setting
2
I/F Block Set.
3
Security Level
Network Setting: a b
1
*********************
TCP/IP Settings
2
NetWare
3
AppleTalk
1
NOTE:
[ Login ] Appendix-7 for details on entering characters.
2
[ Exit ]
IMPORTANT:
logged in using a user ID with administrator privileges.
The default settings of the login user name and login
password are both "2600".
If you have logged in using a user ID without
administrator privileges, the screen will display
Administrator only. and return to the standby screen.
3
a b
[ Exit ]
4
[ Exit ]
5
2-17
Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.
Refer to Character Entry Method on
In the Sys. Menu/Count. menu, press the
key to select [System], and then press the OK key.
To make the settings, you must have
In the System menu, press the
select [Network Setting].
Press the OK key. The Network Setting menu
appears.
Press the or key to select [TCP/IP Settings].
Preparation before Use
or
or key to
2