5.25 V4001
M
AKE SURE THAT CUTTING PLIERS IS SHARP
PREVENT DAMAGING THE SHIELD CAN FENCE
Remove the shield can lid, use a dentist hook.
Remove the pick up area according to the white lines with
a cutting plier.
This pick up area doesn't have to be replaced.
Replace the Diode Rectifier.
Use Hot air repair equipment.
Put back a new shield can lid.
5.26 V4002, V4005
M
AKE SURE THAT CUTTING PLIERS IS SHARP
PREVENT DAMAGING THE SHIELD CAN FENCE
Remove the shield can lid, use a dentist hook.
Remove the pick up area according to the white lines with
a cutting plier.
This pick up area doesn't have to be replaced.
Replace the Trans P-channel Mosfet.
Use Hot air repair equipment.
Put back a new shield can lid.
1210-5423
Rev1
©
Sony Ericsson Mobile Communications AB
Diode Rectifier
-
EDGED TO
.
Trans P-channel Mosfet
-
EDGED TO
.
Working Instruction, Electrical
21(29)