5.13 N2664
Remove the shield can lid.
Use a dentist hook.
Replace the ESD Protection.
Use Hot air repair equipment.
Put back a new shield can lid.
Press on all sides of the lid until you hear a "click" sound.
5.14 N3001
M
AKE SURE THAT CUTTING PLIERS IS SHARP
PREVENT DAMAGING THE SHIELD CAN FENCE
Remove the shield can lid, use a dentist hook.
Remove the pick up area according to the white lines with
a cutting plier.
This pick up area doesn't have to be replaced.
Replace the Bluetooth module.
Use BGA repair equipment.
Put back a new shield can lid.
Press on all sides of the lid until you hear a "click" sound.
1210-5423
Rev1
©
Sony Ericsson Mobile Communications AB
ESD Protection
Bluetooth module
-
EDGED TO
.
Working Instruction, Electrical
15(29)