5.19 N4071
M
AKE SURE THAT CUTTING PLIERS IS SHARP
PREVENT DAMAGING THE SHIELD CAN FENCE
Remove the shield can lid, use a dentist hook.
Remove the pick up area according to the white lines with
a cutting plier.
This pick up area doesn't have to be replaced.
Replace the Single Gate.
Use Hot air repair equipment.
Put back a new shield can lid.
5.20 N5010
M
AKE SURE THAT CUTTING PLIERS IS SHARP
PREVENT DAMAGING THE SHIELD CAN FENCE
Remove the shield can lid, use a dentist hook.
Remove the pick up area according to the white lines with
a cutting plier.
This pick up area doesn't have to be replaced.
Replace the Asic Tjatte3.
Use Hot air repair equipment.
Put back a new shield can lid.
1210-5423
Rev1
©
Sony Ericsson Mobile Communications AB
Single Gate
-
EDGED TO
.
Asic Tjatte3
-
EDGED TO
.
Working Instruction, Electrical
18(29)