Computer Setting; Adjusting The Height And The Viewing Angle; Panel Rotation - Iiyama G-Master GB2730QSU User Manual

COMPUTER SETTING

 Signal Timing
Change to the desired signal timing listed on page 28: COMPLIANT TIMING.

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE

 For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
 You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 22
degrees upward and 5 degrees downward.
NOTE  Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
 Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
 Injury can occur if care is not taken to
avoid finger contact with the displays
base when adjusting the height.

PANEL ROTATION

Adjust the monitor's height.
Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
 Attempting to rotate without fully extending
NOTE
upward may cause damage to stand.
 Video card for portrait display will be
required for rotating the image on the
screen.
Adjust the monitor's angle to your preference.
45°
Monitor
Stand
BEFORE YOU OPERATE THE MONITOR 9
130mm
45°
90°