Table of Contents
Advertisement
3 Connect
Place the unit
1
Place the unit near the TV.
2
Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Note
•
To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
•
Place this unit on top of a table.
•
Never place this unit in an enclosed cabinet.
•
Install this unit near the AC outlet where the AC power
plug can be easily reached.
Connect speakers
Note
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
1
Hold down the socket flap.
2
Insert the stripped part of the wire
completely.
• Insert the right speaker wires to "R",
left speaker wires to "L".
• Insert the red wires to "+", black wires
to "-".
3
Release the socket flap.
Connect video options
Select the best video connection that the TV
can support.
Option 1: Connect to TV through
•
HDMI-ARC (for an HDMI, DVI or HDCP-
compliant TV).
Option 2: Connect to TV through standard
•
HDMI (for an HDMI, DVI or HDCP-
compliant TV).
•
Option 3: Connect to the composite
video jack (for a standard TV).
Option 1: Connect to TV through
HDMI (ARC)
Best quality video
Your home theater supports HDMI version
with Audio Return Channel (ARC). If your TV
is HDMI ARC compliant, you can hear the TV
audio through your home theater by using a
single HDMI cable.
EN
7
Advertisement
Table of Contents
