Contents 7 Product information 1 Important Specifications Safety USB playability information Supported MP3 disc formats 2 Your micro system RDS program types Introduction What's in the box 8 Troubleshooting Overview of the main unit Overview of the remote control 9 Notice 3 Get started Connect speakers Connect FM antenna...
1 Important • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the device. • Only use attachments/accessories specified by the manufacturer. Safety • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the device.
To establish a safe volume level: • Where the MAINS plug or an appliance coupler is used as the disconnect device, • Set your volume control at a low setting. the disconnect device shall remain readily • Slowly increase the sound until you can operable.
Congratulations on your purchase, and • 2 x speakers welcome to Philips! To fully benefit from the • 2 x speaker cables support that Philips offers, register your product • 2 x AC power cords at www.philips.com/welcome. • 1 x aerial Before using your product, read all •...
Overview of the main unit • Turn the unit on or off. • Skip to the previous/next track. • Switch to standby mode or Eco • Search within a track/disc/USB. standby mode. • Tune to a radio station. • Bluetooth indicator. • Adjust time.
n NFC area d PRESET/ALBUM • Touch with a Near Field • Select a preset radio station. Communication (NFC) compatible • Skip to previous/next album. device to set up Bluetooth connection automatically. • Skip to the previous/next track. • Search within a track/disc/USB. • Tune to a radio station.
Always follow the instructions in this chapter in sequence. SPEAKER OUT If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No.
Repeat steps 2-3 to set hour and minute. Prepare the remote control Note Caution • If no button is pressed in 90 seconds, the system exits • Risk of explosion! Keep batteries away from heat, clock setting mode automatically. sunshine or fire. Never discard batteries in fire. •...
4 Play SOURCE SOURCE INFO PRESET/ALBUM SCAN MENU Play from disc SHUFFLE MUTE REPEAT PROG TIMER SOUND CLOCK SLEEP Press SOURCE repeatedly to select DISC source. Press to open the disc compartment. Insert a disc with printed side facing upward. Press to close the disc compartment.
For MP3 tracks, press to select an Control play album. Press to select a track, and then Select a folder. press PROG to confirm. Select an audio file. Repeat steps 2-3 to program more tracks. Pause or resume play. Press to play the programmed tracks. Stop play.
Page 13
Bluetooth devices that can be paired device for details). (see the user manual of the device). Keep the NFC area of the external device Select 'Philips BTB7150' on your and the NFC area of this product within Bluetooth enabled device and input '0000' 2 cm.
Next time when you turn on the unit, the Play from Philips DigitalRadio application station scan does not take place. An application Philips DigitalRadio is available on Apple App Store and Google Play. Note To fully enjoy features of this product, download and install the application to your smart device.
Page 15
To tune to a station from the available station Select a preset DAB+ radio station list: In DAB+ mode, press repeatedly to In DAB+ mode, press to select a preset navigate through the available DAB+ stations. number, and then press OK to confirm.. Store DAB+ radio stations Show DAB+ information automatically...
• [BT UPGRADE] (Bluetooth upgrade): In FM tuner mode, press SCAN. upgrade Bluetooth software if available. » The stations scanned are based on the • [SW VER] (software version): show the selection in step 2. software version of this unit. »...
6 Other features • If DISC/USB source is selected, but no disc is placed or no USB connected, the system switches to tuner source automatically. Set the alarm timer Set the sleep timer This unit can be used as an alarm clock. You can select DISC, TUNER, DAB, or USB as alarm To set the sleep timer, in turn on mode, press source.
7 Product Listen through a headphone information Plug a headphone (not supplied) into the socket on front of this product. Note • Product information is subject to change without prior notice. Specifications Amplifier Maximum Output 150 W Power Frequency Response 60 Hz - 16 kHz; ±3 dB Signal to Noise Ratio ≥70 dBA...
USB playability information USB Direct Version 2.0 full speed Compatible USB devices: USB Charging • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.1) • memory cards (requires an additional card Bluetooth reader to work with this unit) Bluetooth version V2.1 + EDR/support Supported USB formats: APT-X • USB or memory file format: FAT12, FAT16, Frequency band 2.4 GHz ~ 2.48 GHz FAT32 (sector size: 512 bytes)
Philips Web page SCIENCE Science (www.philips.com/support). When you contact VARIED Entertainment programs Philips, make sure that the device is nearby POP M Pop music and the model number and serial number are ROCK M Rock music available.
Page 21
• Aim the remote control directly at the • If you pair and connect through NFC, sensor on the front of the unit. make sure that: • you have enabled both the Bluetooth No disc detected and NFC features on your device. •...
Please inform yourself about the local separate registered trademarks owned by Bluetooth collection system for electrical and electronic SIG, Inc. and any use of such marks by Philips is products. under license. Please act according to your local rules and do not dispose of your old products with your normal household waste.
Page 23
This apparatus includes this label: Note • The type plate is located on the back of the device.