Displaying Information On The Current Position; Your Own Points Of Interest; Data Format - Suzuki SLDA Operating Instructions Manual

48 | en
Train transport
f
f Unpaved roads
f Seasonal roads
Restricted roads
f
f Tap the relevant option.
The corresponding road and transport type is
avoided when the check mark is displayed in the
checkbox.
Note:
In some cases, the navigation system
may use a road or transport type that is
to be avoided in order to enable you to
reach your destination.
f Tap .
Note:
Tap 6 to close the options display.
7.11 Displaying information on the
current position
f In navigation mode, tap 6.
f Tap Position and GPS info.
A map of the area around your position and the
following information are displayed:
f Current road
Current city
f
Longitude
f
Latitude
f
f Altitude
f GPS information
f Tap .
Note:
Tap 6 to close the options display.
7.12 Your own points of interest
In addition to the points of interest stored in the
navigation data, you can also store your own
points of interest and point of interest warnings
on the device.
Point of interest warnings may, for instance,
contain the location of sharp bends.
7.12.1 Data format
The file containing your own points of interest
must comply with the WGS84 standard.
The required file format is ".csv".
Each line of the file may describe one point of
interest containing the following pieces of infor-
mation:
f Longitude
f Latitude
Name
f
Address (optional)
f
Telephone number (optional)
f
A line of the file may look like this:
77.61,12.92,Park,Bangalore City,00917829
Notes:
f Ensure that no piece of information
contains a comma. Inside the file,
commas are exclusively used to
separate the different pieces of
information from one another.
f Coordinates of the southern and
western hemisphere have to be
specified by negative values.
The name of the csv file represents the name of
the point of interest category. When setting up a
csv file, be sure to insert only points of interest
Navigation