Table of Contents
Advertisement
36 | en
7.2 Entering a destination
7.2.1 Opening the Destinations
menu
f Tap the direct-select button
menu.
or:
f Tap
in the map view.
The Destinations menu is displayed:
Note:
If a route guidance session is active,
the Route menu of the Destinations
menu will be displayed. For more
details please refer to the section
entitled "Route guidance settings in the
Route menu" (page 43).
Under the New tab, you can specify a new desti-
nation.
Please refer to the sections "Entering an
address" (page 36) and "Selecting a point of
interest" (page 37).
in the Home
If you switch to the Previous tab or Favourites
tab, you can select a previous destination or a
stored favourite as your new destination.
Please refer to the section entitled "Selecting
one of the previous destinations or a destination
stored as a favourite" (page 39).
7.2.2 Entering an address
f In the Destinations menu, tap the New tab, if
necessary.
f Tap New address.
The Address input menu is displayed.
Enter the following address components in this
order:
1. Country or State
2. City / Postcode / Area
3. Street
4. Intersection or House number
To enter an address component,
f tap the relevant item.
The keypad is displayed:
Note:
If the "Lock keypad while driving"
setting is enabled, you will only be able
to access the keypad while the vehicle
is stationary. For further details on
this, please read the section entitled
"Enabling the keypad lock while driv-
ing" (page 50).
f Enter the relevant name or number.
Note:
If necessary, tap ÆØÜ to show the
special characters on the keypad.
The first suitable match found for what you have
entered is displayed above the keypad.
f Tap OK to select the displayed match.
Navigation
Advertisement
Table of Contents
