Table of Contents
Advertisement
38 | en
f Tap POI search or MyPOI search.
The Address input menu is displayed.
f Enter a country and a city or postcode for
the point of interest, as described in the
section entitled "Entering an address"
(page 36).
f Tap POI search.
The available points of interest are displayed.
f
Method 2: Point of interest nearby:
f In the Destinations menu, tap the New
tab.
f Tap POIs nearby or MyPOIs nearby.
The available point of interest categories are
displayed.
Note:
Up to 30 available points of interest
inside a 150 km radius around your
current position are listed.
Selecting a point of interest and starting route
guidance
The available points of interest are divided into
categories such as Automotive and Emergency.
f Tap the desired category.
Or:
f Tap All categories to display all of the avail-
able points of interest.
Notes:
A category may contain further
f
subcategories. For example, the
Automotive category is divided into
subcategories such as Petrol station
and Garage. Keep selecting the
desired subcategories until the
points of interest are displayed.
f
You can also use a search term to
find one or more particular points of
interest. To do so, tap Search, enter
the desired search term and confirm
by tapping OK.
f Tap the desired point of interest.
Details about the point of interest and a map of
the surrounding area are displayed (see the
section entitled "Location details view" (page
39)).
f Tap
to start route guidance.
The system calculates the route to the selected
destination.
Note:
If a route guidance session is already
active, you can choose
whether the current destination or,
f
if applicable, the current waypoint
should be replaced by the new
destination (see the section entitled
"Changing the destination while
route guidance is active" (page
41)) or
f
whether the new destination should
be added to the current route as a
waypoint (see the section entitled
"Entering a waypoint" (page
41)).
7.2.4 Entering coordinates
f In the Destinations menu, tap the New tab, if
necessary.
f Tap Geo coordinates.
The Enter Geo coordinates menu is displayed.
f Enter the coordinates.
Notes:
You can select in which format
f
coordinates are specified (see the
section entitled "Selecting the geo
coordinate format" (page 50)).
f
In order to enter the values of a
cordinate, first tap the respective
input field. Then enter the value by
tapping the respective digit on the
numeric keypad.
f
If you want to enter coordinates for
the southern or eastern hemi-
sphere, tap N or W.
If you enter a wrong digit, you can
f
delete it by tapping
f Tap
.
Navigation
.
Advertisement
Table of Contents
