Table of Contents
Advertisement
Adjusting the LCD Display
You may wish to adjust the LCD (Liquid-Crystal Display) when you begin using your
computer. A TFT (Thin-Film Transistor) LCD does not require adjustment for contrast
because the contrast is set to remain at maximum.
To adjust the LCD:
•
Press <Fn+F10> to decrease the display brightness.
•
Press <Fn+F11> to increase the display brightness.
Turning Off Your Computer
APM (Advanced Power Management) Mode
To turn off the computer:
1. Click Start on the taskbar.
2. Click Shut Down.
3. Select the shut down option.
4. Click OK or Yes.
•
If the operating system is Windows 98/2000/Me, the computer turns off.
ACPI (Advanced Configuration and Power Interface) Mode
Your computer supports ACPI mode. If your operating system supports ACPI and you
want to shut down the computer just by pressing the power button, then follow next
steps to set the menu in Power Management Properties. Also see "Using Power
Using Your Computer for the First Time 13
Advertisement
Table of Contents
