Samsung HG32EE470 Installation Manual page 67

Mixed Channel Map
The Mixed Channel Map function mixes Air, Cable and Satellite channels.
− The Mixed Channel Map function should be ON in order to mix Air, Cable and Satellite channels.
− Use the Channel Editor to sort the channels after turning on the 'Mixed Channel Map' function in the Hotel Option
Menu.
Sound Bar
y Samsung Sound-Bar & Hospitality TV
− Use Samsung Sound-Bar & hospitality TV's support for HDMI 1.4 to listen to TV sound on the Sound-Bar using a
single HDMI cable.
− Supported models:
y Sound-Bar: HW-K450/K550/M550/M450/M4500
y "Hotel mode" operation from the Sound Bar
− The following TV hotel options should be set in advance.
y Hotel option → Power On → Power ON Volume = "Enable" / Power ON Vol / Max Vol
y Hotel option → External Device → Sound Bar Out = "On"
− Connect an HDMI cable from the HDMI OUT port of the Sound-BAR to the HDMI1 port of the hospitality TV.
− After being connected to the hospitality TV via an HDMI Cable, the Sound-Bar automatically detects the TV
while it turns on, and is converted to "hotel mode" by itself.
− The change of the power-on volume & max volume on the TV is applied to the connected sound-bar, as the TV
boots up twice.
y Features of "Hotel Mode" in Sound Bar
− Power on/off is synchronized with the TV.
− HDMI_CEC enabled.
− Accessible via the "HDMI OUT" port only. (Other inputs are disabled)
− "Power-on"&"max" volume are synchronized with the TV. (The Sound-Bar's volume is set to half that of the TV)
− Adjustable "power-on" & "max" volume are acquired from the TV's hotel option menu. (Sound-Bar volume=TV
volume/2)
Ex.) If the volume settings on the TV are "power-on volume=20 and max volume=90", the Sound bar will work as
power-on volume=10, max volume=45.
*This function may differ depending on the model.
67
English