Samsung HG32EE470 Installation Manual page 45

Hotel TV Function
No
Category
Edit Welcome Message
13 Logo/Message
14 Cloning
15 REACH Solution
REACH Server Version
16 Security
Item Initial value
Welcome Message
Hospitality Logo
Hospitality Logo DL
Logo Display Time
Clone TV to USB
Clone USB to TV
Setting Auto Intialize
REACH 4.0
REACH Channel
Group ID
REACH Update Time
REACH Update
Immediate
Room Number
Factory Lock
Password Popup
Password Input
Password Setting
Password Reset
Security Mode
USB
HDMI
TTX Security
OFF Displays the Welcome Message for 5 seconds when the TV turns On.
Edits the Welcome Message.
Turns the Hospitality logo feature On or Off. If On, when the TV is
OFF turned on, the Logo is displayed, before the signal from the initial
source, for the amount of time set in "Logo Display Time".
Downloads the Hospitality logo. Hospitality logo file requirements:
y BMP or AVI files only.
...
y Max file size: BMP - 960 X 540. AVI - 30MB.
y The file must be named samsung.bmp or samsung.avi.
Hospitality Logo Display Time (3/5/7 seconds). (Only available when
...
"Home menu Display" is OFF)
- Clones the current TV options to a USB memory device.
- Clones the saved TV options on a USB memory device to the TV.
When Setting Auto Initialize is set to On, and the power is turned off
and on or the Master Power is turned off and on, the data is restored
OFF to the cloned values. If there is no cloned value, even when Setting
Auto Initialize is set to On, it will be ignored and the operation will be
the same as when Setting Auto Initialize is set to Off.
y ON: Open REACH 4.0
OFF
y OFF: Close REACH 4.0
... Select SIRCH Update Channel.
... Select the SIRCH Group ID.
Select the SIRCH update Time. In SIRCH update time , you have the
option to perform an automatic upgrade at 12:00 AM/PM or at 2:00
...
AM/PM. You can perform hourly upgrades at an interval of either 1 hr
or 2 hrs.
y ON: Whenever the TV enters Standby mode, it always performs the
SIRCH Update.
...
y OFF: Only performs the SIRCH Update at the selected SIRCH Update
Time.
... Edit the room number.
0000 Displays the version of the SIRCH Clone file currently on the TV.
Delete Device List when power on or off.
OFF y ON: Password is needed before entering factory menu.
y OFF: Password requirement is disabled.
Enable/disable Password Popup. If this option is set to OFF, the TV
will not display the password input popup window before you are
...
allowed to enter the Factory menu. If set to ON, the password input
popup window appears.
... Input Password 00000000.
... Set new Password.
... Reset Password to 00000000.
... Security Mode ON or OFF.
... USB Disable or Enable.
... HDMI Disable or Enable.
... TTX function Enable or disable.
Description
English
45