Samsung HG32EE470 Installation Manual page 55

Multi Code Remocon
The Multi Code Remote Control is a special transmitter that can control multiple TVs with one remote.
This function is useful in environments where there is more than one TV in one location, such as hospitals. The Set ID
number will be displayed in the source OSD. It is possible to support up to 9 different remote key transmissions for multi
code.
The initial ID code for each TV is "0".
The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX or DTV channels)
− The ID code can be from 0 to 9.
− Press and hold the
− The Set ID OSD will be displayed in a central position.
− The following text will be displayed. "Remote control code is set to X. If you want to change the Remote control
code, enter the chosen digit." (x is the digit number) This OSD will be displayed until the exit key is pressed.
Remote control code is set to 0. If you want
to change the Remote control code, enter the
chosen digit.
− For example, the TV and Remote control will be set to ID code #1 if the user presses #1.
− The following text will be displayed: "Remote control code is changed to 1". The TV can then only be controlled
by a remote control with the same ID code as the TV.
− If the ID code between the remote control and the TV does not match, the following text will be displayed:
" TV ID x" (x is the TV's ID)
− To reset the ID code, press and hold the
and Remote control will be reset to "0". "Remote control code is set to 0." will be displayed.
− The way to set or reset the ID may differ depending on the remote control. See the table below.
Setting the Time
MENU m → System → Time → Clock → Clock Set
O
y The time is entered
− Press the remote control button to select Clock and set up the time.
y Setting the Interactive Mode Time
− If the Hotel System transmits the time information, the time is set
automatically.
− If the Hotel System does not transmit the time information, the time
cannot be displayed.
✎ If the time is set, the clock will be displayed on the front panel.
RETURN + MUTE keys for longer than 7 seconds, and then press the digit key you want to set.
EXIT + MUTE keys for longer than 7 seconds. The ID codes of both the TV
Time
Clock
Sleep Timer
Wake-up Timer
Clock
Clock Mode
y Clock Set
y Time Zone
Off
Manual
Auto
55
English