Samsung BD-E6500 User Manual page 27

< Getting the Network Settings Values >
You can view your Network Settings values on
most Windows computers. To view the Network
Settings values, follow these steps:
• Windows XP
1 .
Right click the Network icon on the bottom
right of the Windows desktop.
2. In the pop-up menu, click Status.
3.
On the dialog that appears, click the Support
tab.
4.
On the Support tab, click the Details button.
The Network settings are displayed.
• Windows 7
1. Click the Network icon on the bottom right of
the Windows desktop.
2. In the pop-up menu, click Network and
Sharing Center.
3.
On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
4.
On the Support tab, click the Details button.
The Network settings are displayed.
I NOTE I
~
Depending on your Windows version, the information may
differ.
Wireless Network
You can setup a wireless network connection in
three ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
When you configure the wireless network
connection, any wireless network devices currently
connected through the player or, if applicable,
the playerls current wired connection, will be
disconnected.
o Wireless (General) - Automatic
After followng Steps I to 3 in ~~configuring Your
Network Connection
II
on page 26.
1.
Select
Start
in the Network Settings screen,
and then press the
[5I
button.
The player searches for and then displays a
list of the available networks.
2. Select the desired network, and then press
the
[5I
button.
3.
Select
Next,
and then press the
[5I
button
again.
4.
On the Security screen, enter your network Is
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing
[5I
button.
5.
When done, select
Next
at the right of the
screen. The player verifies the network
connection and then connects to the
network.
I NOTE I
~ You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
u Wireless (General) - Manual
If you have a static IP address or the Automatic
procedure does not work, you Ill need to set the
Network Settings values manually.
After folloiwng Steps I to 3 in ~~configuring Your
Network Connection I I on page 26:
English
27
I