Troubleshooting - Electrolux ERC3505 Instruction Book

TROUBLESHOOTING

Symptoms
The indicator light does not
light up.
The heater plate is not
warm.
The KEEP WARM light does
not light up when the cook-
ing process is completed.
The rice is not cooked or
the cooking time is taking
too long.
The rice is too hard or too
soft.
The rice is scorched.
The rice cooker does not
automatically switch to keep
warm mode.
There is no timer display on
the LED panel.
www.electrolux.com
Possible Causes
The circuit of electric rice cooker
is not connected to power supply.
The power wiring board is dam-
aged.
The circuit connection breaks
down.
The master circuit board is dam-
aged.
The heater plate is burnt out.
The light is defective.
Not enough water is added.
Incorrect function is selected.
The inner pot is not properly in
contact with the heater plate.
Possible foreign matter between
the inner pot and heater plate.
The heater plate is damaged.
Not enough or too much water
has been added.
The rice has not been rinsed well.
The master temperature controller
is defective.
The master temperature controller
is defective.
The timer battery has run out.
Solutions
Check that the switch, plug and
socket, fuse and leading wire of the
power supply are in good condition
and properly connected to the
mains and if plug is inserted firmly
into the wall socket.
Contact authorized service center.
Add water to the level indicated on
the scale inside the inner pot that
corresponds to the number of cups
of rice used.
Press [MENU] till desired function is
selected, then press [COOK] to start
the cooking cycle.
Make sure there is no foreign resi-
due on the heater plate.
Contact authorized service center.
Add water to the level indicated on
the scale inside the inner pot that
corresponds to the number of cups
of rice used.
Rinse the rice until water runs clear.
Contact authorized service center.
Contact authorized service center.
Contact authorized service center.
EN
ID
TH
VN
CNS
7