Advertisement
CONNECTING THE SUBWOOFER
WIRELESS:
Power
Supply
AC Cord
1. Connect the supplied LFE cable from your receiver's or processor's subwoofer output to
either of the transmitter unit's Input connectors.
If your receiver/processor does not have a dedicated subwoofer output but does have
a set of preamp-level (volume-controlled) line outputs, use a stereo audio cable (not
supplied) to connect them to both of the transmitter unit's Input connectors
2. Connect the transmitter power supply to the Power connector, and into a working AC
outlet,
3. Set the Wireless Code switches on the transmitter unit and subwoofer to the same
position.
WIRED:
As an alternative to wireless operation, you can connect the subwoofer conventionally,
using the supplied audio cable.
NOTE: You can use both the wireless and the wired methods to connect the subwoofer to
two different sources. However, if you play both sources at the same time the subwoofer
will play bass from them both.
Revel B8 Wireless Subwoofer
Owner's Manual
DC 5V
WIRELESS
CODE
R
INPUT
L
1
2
3
4
Power
Supply
LFE Cable
(supplied)
CONNECTING THE SUBWOOFER TO A RECEIVER OR PREAMP/
PROCESSOR WITH A DEDICATED SUBWOOFER OUTPUT
Use either
connector
Set Input Mode
SUBWOOFER/
LFE OUT
Switch to "LFE"
LFE Cable (supplied)
Use this installation method for receivers and preamps/processors that have a dedicated
subwoofer output.
Use the supplied LFE cable to connect the subwoofer's Line-Level LFE In connector to
the dedicated subwoofer output (or LFE output) of your audio/video receiver or preamp/
processor. Set the subwoofer's Input Mode switch in the "LFE" position.
Configure your receiver or preamp/processor's setup menu for "Subwoofer On." After
you have made and verified all connections, plug the subwoofer's AC Power Cord into a
working AC outlet.
5
Advertisement
