Upgrade Your Radio's Firmware; Factory Reset - PURE EVOKE Flow Owner's Manual

6.5 Upgrade your radio's firmware
Firmware upgrades may be issued in the future to provide exciting new features. You can check if a
firmware upgrade is available and download the upgrade over your wireless network. Alternatively,
you can connect EVOKE Flow to your PC using a USB cable (A-to-mini-B type, not supplied) and
download the firmware upgrade manually from http://support.pure.com
To upgrade over your wireless network (recommended)
1 Tap O
2 EVOKE Flow will search for any available upgrades.
3 If an upgrade is available the message
the event that older software upgrades, which have been superceded by the new upgrade, are
available tap
4 Tap O
To upgrade using a USB cable (where a wireless network is not available)
1 Visit http://support.pure.com to check to see if an upgrade is available for EVOKE Flow.
2 If an upgrade is listed on the website, download the most recent upgrade to your PC.
3 Connect EVOKE Flow to your PC's USB port. Follow the on-screen instructions provided with
the upgrade software.

6.6 Factory reset

Resetting your radio removes all FM presets (but not your internet Favorites), and resets all options to
defaults. All your wireless networks settings will be cleared.
1. Press and hold
2. Tap O
Note If you only want EVOKE Flow to forget all wireless networks, not your other settings, you
can select
36 EVOKE Flow Owner's Manual v1.0
Options; highlight and select
O Show all to display all the available (legacy) upgrades.
OK to download and install the new firmware, which takes 3–4 minutes.
O Options for 3 seconds to display the
Yes to confirm the reset or
'Clear network settings'
'Additional settings'; select 'Upgrade'; and select 'Wi-Fi'.
'New version available: v1.x'
'Factory reset'
O No to cancel, or wait 7 seconds for the screen to time-out.
in the 'Wi-Fi settings' menu.
will appear on screen. In
menu.
Universal options