Daikin EKRTR Installation Manual page 9

6 Optionally, pass the temperature sensor wiring (EKRTETS)
through the back of the thermostat and wire it as shown
below.
7 Fasten the thermostat with the supplied screws.
Be careful not to pinch the wiring when fastening.
8 Optionally for the EKRTETS, put the transparent cable
protection back into place and fix the cable protection with
the screw.
9 Close the thermostat cover.
10 Remove the protective film from the LCD.
3.2. Table-top installation of the thermostat
Only if the optional temperature sensor
EKRTETS is not installed as external
temperature sensor, the EKRTR can be
used as a table-top model.
In that case, no particular installation
for the thermostat is needed. The
thermostat functions as a complete
wireless unit and can be put anywhere
in the house into its table holder.
Remove the battery insulator and the protective film from the
LCD, as described in
EKRTR + EKRTETS
Room thermostat
4PW56105-1
"Wall-mounted installation" on page 6.
Installation manual
7