Electrical Requirements - New World NW801FZ Installation And User Instructions Manual

Your New Integrated Appliance
Using your new integrated appliance is very simple. Nevertheless, to get the best results it
is important that you read right through this handbook before using your integrated
appliance for the first time.

Electrical Requirements

WARNING: This appliance must be earthed.
Fuses
Your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse,
only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the
fuse cover, a replacement may be obtained from your local authorised Service Centre or
Electricity company. Correct replacement is identified by colour coding or the marking on
base of plug.
WARNING: Do not use plug unless fuse cover is fitted.
Changing the Plug
Cut off and dispose of the supplied plug if it
does not fit your socket.
WARNING: To avoid a shock hazard do
not insert the discarded plug into a
socket anywhere else.
IMPORTANT: WIRES IN THE MAINS
LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING
CODE:
Green/Yellow
Blue
Brown
If you change the plug, the colour of wires
in the mains lead may not correspond with
the colour of the markings identifying
terminals in the plug. You should therefore
wire it as shown.
Changing the Mains Lead
If you have damaged the existing lead or require a longer one a charge will be made. It is
strongly advised that this work is carried out by a qualified electrician.
CE marking certifies that this appliance conforms to the following EEC directives:-
Low Voltage Equipment - 72/23/EEC & 93/68 EEC
Electromagnetic Compatibility - 89/336/EEC, 92/31/EEC & 93/68/EEC
WARNING: AVOID ACCIDENTS TO CHILDREN.WHEN DISCARDING AN OLD FRIDGE
OR FREEZER BE CERTAIN TO MAKE THE LOCK UNUSABLE. IF
POSSIBLE,REMOVE THE DOOR AND DISCARD SEPERATELY.
DO NOT ATTEMPT TO SIT ON TOP OF YOUR APPLIANCE. IT IS NOT DESIGNED
FOR SUCH USE AND YOU COULD INJURE YOURSELF OR DAMAGE THE
2
- Earth
- Neutral
- Live
APPLIANCE BY SUCH ABUSE.
Green and
yellow (Earth)
wire to terminal
marked 'E',
symbol , or
coloured green
and yellow.
Blue (Neutral)
wire to terminal
marked 'N' or
coloured black.
142570
13A ASTA
approved
fuse to
BS1362.
Brown
(Live)
wire to
terminal
marked 'L'
or
coloured
red.
Cord clamp