Table of Contents
Advertisement
Controls
Temperature selection
The thermostat control goes from 1 to 7.
The coldest setting is 7.
We recommend setting 4 for normal use.
We also recommend setting the control
towards the 7 setting when loading small
amounts of fresh food to accelerate
freezing.
Getting your Appliance ready for use.
Before connecting to the mains electricity
supply leave the appliance to stand for 2
hours to allow the cooling system to settle.
Clean the appliance, and be thorough,
especially in the interior. (see 'Caring for
your Appliance' - Cleaning, page 11).
Final Check:
Before you start using your appliance
check that:
- It is thoroughly dry inside.
- There is adequate air circulation.
- Accessories are correctly placed in their
positions.
Starting:
Turn the appliance on and set the
thermostat knob to the continuous
setting.The red and yellow control lights are
on and the alarm is sounding.Turn off the
alam by pressing the alarm off button.When
the red light goes off, wait for a couple of
hours and load the freezer with packages
of fresh foods.
After 24 hours set the freezer to the
required temperature setting.
10
Running in the Compressor:
Your appliance is operated by a
compressor which switches on and off in
order to maintain the internal temperature.
The compressor requires a running in
period of up to 2 months.During this time it
has to work a little harder and may result in
more noise than usual.
Whether the compressor is running or
not, it is normal to hear sounds created
by the liquid and gases sealed within
the system.
142570
Hide quick links:
Advertisement
Table of Contents
