New World NW801FZ Installation And User Instructions Manual page 13

Caring for your Integrated Freezer
Cleaning the condenser
Make sure the appliance is
disconnected from the power supply.
Dust from the condenser should be
vacuumed as follows;
* Through the plinth grille, release the
fastener.
* Pull the grille towards you and remove it.
* Remove the bottom board of the kitchen
cabinet.
* Pull the condenser dish out.
* Use the vacuum cleaner to clean the dust
from the condenser.
* Replace the condenser dish and the grille
in the opposite order.
After cleaning, connect the appliance to the
power supply and reload it.
Periodical cleaning of the condenser.
Make sure the appliance is
disconnected from the power supply.
In order to optimize the operation of the
appliance and save energy, it is
recommended to periodically clean the
dust from the condenser at the back of
the appliance.
* Empty the contents of the appliance.
* Remove the supporting panel from the
bottom of the kitchen cabinet.
* Remove the screws fixing the appliance
to the kitchen worktop.
* Pull the appliance out and expose the
condenser at the back of the appliance.
* Unscrew the screws from the condenser
cover and remove the cover.
* Clean the dust and dirt from the
condenser.
After cleaning,refit the appliance back in
position, turn the power supply back on and
reload.
142570
13