Table of Contents
Advertisement
INSIDE OF OVEN
The oven should always be cleaned
after use when it has cooled down.
The cavity should be cleaned using a
mild detergent solution and warm
water. Suitable proprietary chemical
cleaners may be used after first consult-
ing with the manufacturers recommen-
dations and testing a small sample of
the oven cavity. Abrasive cleaning
agents or scouring pads/cloths should
not be used on the cavity surface.
• NOTE: The manufacturers of this
appliance will accept no responsibility
for damage caused by chemical or
abrasive cleaning.
Attention: Do not store flammable
material in the oven.
Let the oven cool down and pay spe-
cial attention no to touch the hot heat-
ing elements inside the oven cavity.
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
– Fit the side runner frames into the
– Slide the tray and rack into the run-
– To dismantle, operate in reverse
Fig. 8.8
holes on the side walls inside the
oven (Fig. 8.8).
ners (Fig. 8.9).
The shelf must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven.
order.
Fig. 8.9
23
Hide quick links:
Advertisement
Table of Contents
