Subscribe to Our Youtube Channel
Related Manuals for IBASE Technology AMS300
Summary of Contents for IBASE Technology AMS300
- Page 1 AMS300 AMS301 AMS302 Compact Expandable Fanless System User’s Manual Version 1.0 (Oct. 2017)
- Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).
-
Page 3: Compliance
CE conformity declaration may no longer apply. AMS300 has been tested and found to comply with the limits for a Class B device, and AMS301 & AMS302 comply with those for a Class A device pursuant to Part 15 of the FCC Rules. -
Page 4: Important Safety Information
You are not suggested to disassemble, repair or make any modification to the device. Disassembly, modification, or any attempt at repair could generate hazards and cause damage to the device, even bodily injury or property damage, and will void any warranty. AMS300 / 301 / 302 User Manual... -
Page 5: Caution
Software in use (such as OS and application software, including the version numbers) 3. If repair service is required, you can download the RMA form at http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and contact your distributor or sales representative. AMS300 / 301 / 302 User Manual... -
Page 6: Table Of Contents
Pinout for COM Ports, DC-In & Power Button Connectors ..28 Setting the Jumpers ................30 2.2.1 How to Set Jumpers ............... 30 Jumper & Connector Locations on Motherboard ........31 Jumpers Quick Reference ..............32 AMS300 / 301 / 302 User Manual... - Page 7 USB Configuration ..............67 Chipset Settings ..................69 4.5.1 PCH-IO Configuration ............. 70 Security Settings ................... 72 Boot Settings..................73 Save & Exit Settings................74 Appendix ...................... 75 I/O Port Address Map ................76 AMS300 / 301 / 302 User Manual...
- Page 8 Interrupt Request Lines (IRQ) ............... 79 Watchdog Timer Configuration .............. 81 viii AMS300 / 301 / 302 User Manual...
-
Page 9: Chapter 1 General Information
Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Optional Accessories • Specifications • Overview • Dimensions... -
Page 10: Introduction
1.1 Introduction The AMS300 / AMS301 / AMS302 is a product series of IBASE embedded computing system, applicable to thin clients, smart industrial automation or controller, and retail equipment. It is a compact and fanless design with an ® Intel Gen. -
Page 11: Packing List
Terminal Block for DC-In Power Adapter (3 pins) • Terminal Block for Remote Power Button (2 pins) • Wall Mount Kit • Round Head Screw (for Wall Mount Kit) • Disk (including drivers and this user manual) AMS300 / 301 / 302 User Manual... -
Page 12: Optional Accessories
Side Mount Bracket • DIN Rail Bracket • Cable kit for 2 SSD Assembly (including 4 screws, and a SATA cable) • Bracket for fieldbus module (for AMS301 only) (Profibus module) (Profinet module) AMS300 / 301 / 302 User Manual... -
Page 13: Specifications
2.7 kg ( lb) 3.1 kg ( lb) 3.3 kg ( lb) Certificate CE / LVD / FCC Class B I/O Ports Remote 2-pin terminal block for the external, remote power button Power Button AMS300 / 301 / 302 User Manual... - Page 14 • Non-operating: 1 Grms / 5 ~ 500Hz • Shock Operating: 20 g / 11 ms Protection • Non-operating: 40 g / 11 ms All specifications are subject to change without prior notice. AMS300 / 301 / 302 User Manual...
-
Page 15: Overview - Ams300
DVI-I Port Antenna Holes USB 3.0 Ports Wall Mount Kit The LED indicators S1 (for status) and E1 (for errors) are configurable by users. Be cautious of the hot surface when using the device. AMS300 / 301 / 302 User Manual... - Page 16 Wall Mount DIN Rail Mount Side Mount AMS300 / 301 / 302 User Manual...
-
Page 17: Overview - Ams301
Antenna Holes USB 3.0 Ports Wall Mount Kit DisplayPort The LED indicators S1 (for status) and E1 (for errors) are configurable by users. Be cautious of the hot surface when using the device. AMS300 / 301 / 302 User Manual... - Page 18 Wall Mount DIN Rail Mount Side Mount AMS300 / 301 / 302 User Manual...
-
Page 19: Overview - Ams302
Antenna Holes USB 3.0 Ports Wall Mount Kit DisplayPort The LED indicators S1 (for status) and E1 (for errors) are configurable by users. Be cautious of the hot surface when using the device. AMS300 / 301 / 302 User Manual... - Page 20 Wall Mount DIN Rail Mount Side Mount AMS300 / 301 / 302 User Manual...
-
Page 21: Dimensions - Ams300
General Information 1.9 Dimensions – AMS300 Unit: mm AMS300 / 301 / 302 User Manual... -
Page 22: Dimensions - Ams301
Dimensions – AMS301 1.10 Unit: mm AMS300 / 301 / 302 User Manual... -
Page 23: Dimensions - Ams302
General Information Dimensions – AMS302 1.11 Unit: mm AMS300 / 301 / 302 User Manual... -
Page 24: Chapter 2 Hardware Configuration
Chapter 2 Hardware Configuration The information provided in this chapter includes: • Essential installations before you begin • Information and locations of connectors... -
Page 25: Essential Installations Before You Begin
Release 5 screws on the rear side of the device and 5 screws on the bottom. Release 4 screws on the front side of the device and 4 AMS301: screws on the bottom. AMS300 / 301 / 302 User Manual... -
Page 26: Memory Installation / Replacement
To remove the module, press the ejector tabs outwards with your fingertips to eject the module. AMS300 / 301 / 302 User Manual... -
Page 27: Ssd Installation
2.1.2 SSD Installation To install or replace the SSD, follow the instructions below for installation. This is illustrated by the example of AMS300. SSD: 1. Release 2 screws to pull out the SSD tray. 2. Put your 2.5” SSD into the tray and secure it with the supplied 4 screws... - Page 28 SSD onto the bracket, secure it with 4 screws as pointed by arrows below. 4. Then secure the bracket and put the tray back to the device. Note: The screws and cables for the 2 SSD can be optionally purchased from IBASE. AMS300 / 301 / 302 User Manual...
-
Page 29: Mini-Pcie Network Cards Installation
3. Locate the mini-PCIe slot, align the key of the mini-PCIe card to the interface, and insert the card slantwise. 4. Push the mini-PCIe card down, fix it with the supplied 2 flat head screws for full-sized card and with one screw for half-sized card. AMS300 / 301 / 302 User Manual... -
Page 30: Wifi / 3G / 4G Antenna Installation
1. Thread and fasten the hex nut and the 2. Apply adhesive around here. washer. Then install the antenna. Info: The diameter of the nut is around 6.35 mm (0.25”-36UNC). AMS300 / 301 / 302 User Manual... -
Page 31: Expansion Card Installation
Then secure the cable organizer back. 4. Then secure the device bottom cover back, The rubber inside the bottom cover firmly fixes the expansion cards and prevents the cards from coming off the PCIe slots. AMS300 / 301 / 302 User Manual... -
Page 32: Mounting Installation
• Drywall Drywall over wood studs is acceptable. 2. Mounting on a solid concrete or brick wall with flat and smooth surface AMS300 / 301 / 302 User Manual... - Page 33 2.1.6.1. Wall-Mounting Installation This is illustrated by the example of AMS300. 1. Attach the mounting brackets to your product, and secure with the supplied 4 screws. 2. Prepare at least 4 screws (M3) to install the device on wall .
- Page 34 This is illustrated by the example of AMS301. 1. Attach the mounting bracket to your product, and secure with the supplied 4 screws. 2. Prepare at least 4 screws (M3) to install the device on wall . AMS300 / 301 / 302 User Manual...
- Page 35 2. Hook the DIN rail mounting bracket over the top of the DIN rail, and then press the lower section of the bracket towards the DIN rail to clip the bracket onto it. AMS300 / 301 / 302 User Manual...
-
Page 36: Pinout For Com Ports, Dc-In & Power Button Connectors
DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground Assignment RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground AMS300 / 301 / 302 User Manual... - Page 37 Hardware Configuration • COM2 RS-232 Port COM5 and COM6 are both available for AMS301 and AMS302 only. For AMS300, you can externally use COM5 and COM6 by connecting them from the motherboard. Assigment Assigment DCD, Data carrier detect DSR, Data set ready...
-
Page 38: Setting The Jumpers
When two pins of a jumper are encased in a jumper cap, this jumper is closed, i.e. turned On. When a jumper cap is removed from two jumper pins, this jumper is open, i.e. turned Off. AMS300 / 301 / 302 User Manual... -
Page 39: Jumper & Connector Locations On Motherboard
Hardware Configuration 2.3 Jumper & Connector Locations on Motherboard Motherboard: MB300 AMS300 / 301 / 302 User Manual... -
Page 40: Jumpers Quick Reference
CMOS Data Clearance JBAT1 RTC Content Clearance JBAT2 CPU dGfx Bifurcation Selection JP1, JP2 COM2 RS-232 Power Selection Factory Use Only 2.4.1 CMOS Data Clearance (JBAT1) Function Pin closed Illustration Normal (default) Clear CMOS AMS300 / 301 / 302 User Manual... -
Page 41: Rtc Content Clearance (Jbat2)
Hardware Configuration 2.4.2 RTC Content Clearance (JBAT2) Function Pin closed Illustration Normal Open (default) Clear RTC Close AMS300 / 301 / 302 User Manual... -
Page 42: Cpu Dgfx Bifurcation Selection (Jp1, Jp2)
1 x PCIe (x16) (default) JP2: Open JP1: Close 2 x PCIe (x8) JP2: Open JP1: Open RSVD JP2: Close JP1: Close 1 x PCIe (x8), 1 x PCIe (x4), 1 x PCIe (x4) JP2: Close AMS300 / 301 / 302 User Manual... -
Page 43: Com2 Rs-232 Power Selection (Jp4)
Hardware Configuration 2.4.4 COM2 RS-232 Power Selection (JP4) Function Pin closed Illustration (default) AMS300 / 301 / 302 User Manual... -
Page 44: Connectors Quick Reference
Mini-PCIe (x1) Slot LED Indicators LED2 PCIe (x16) Slot PCIE1 PCIe (x4) Slot PCIE2 Factory Use Only J1, J2, [1], [2], [3] : Refer to 2.1.7 Pinout for COM Ports, DC-In & Power Button Connectors. AMS300 / 301 / 302 User Manual... -
Page 45: Sata Power Connector (J5, J6)
Hardware Configuration 2.5.1 SATA Power Connector (J5, J6) Assignment Assignment Ground Ground 2.5.2 Digital Connector (J4) Assignment Assignment Ground VCC5 OUT3 OUT1 OUT2 OUT0 AMS300 / 301 / 302 User Manual... -
Page 46: System Fan Power Connector (Sys_Fan1)
2.5.3 System Fan Power Connector (SYS_FAN1) Assignment Assignment Ground Rotation detection AMS300 / 301 / 302 User Manual... -
Page 47: Chapter 3 Driver Installation
Chapter 3 Driver Installation The information provided in this chapter includes: • ® Intel Chipset Software Installation Utility • HD Audio Driver Installation • LAN Driver Installation • ® Intel Management Engine Driver Installation • USB 3.1 Driver Installation... -
Page 48: Introduction
INF files for Plug & Play function for the chipset components. Follow the instructions below to complete the installation. 1. Insert the disk enclosed in the package. Click Intel and then Intel(R) Skylake-U/Kabylake-U Chipset Drivers. 2. Click Intel(R) Chipset Software Installation Utility. AMS300 / 301 / 302 User Manual... - Page 49 Driver Installation ® 3. When the Welcome screen to the Intel Chipset Device Software appears, click Next to continue. 4. Accept the software license agreement and proceed with the installation process. AMS300 / 301 / 302 User Manual...
- Page 50 5. On the Readme File Information screen, click Install and then Next for installation. 6. The driver has been completely installed. You are suggested to restart the computer for changes to take effect. AMS300 / 301 / 302 User Manual...
-
Page 51: Graphics Driver Installation
Driver Installation 3.3 Graphics Driver Installation 1. Click Intel and then Intel(R) Skylake-U/Kabylake-U Chipset Drivers. 2. Click Intel(R) HD Graphics Driver. 3. When the Welcome screen appears, click Next to continue. AMS300 / 301 / 302 User Manual... - Page 52 5. Read the Readme File Information and then click Next. 6. Choose a destination folder for installation. 7. The driver has been completely installed. Click Finish and restart the computer for changes to take effect. AMS300 / 301 / 302 User Manual...
-
Page 53: Hd Audio Driver Installation
2. Click Realtek High Definition Audio Driver. 3. On the Welcome screen of the InstallShield Wizard, click Next for installation. 4. The driver has been completely installed. You are suggested to restart the computer for changes to take effect. AMS300 / 301 / 302 User Manual... -
Page 54: Lan Driver Installation
1. Click LAN Card and then Intel(R) Skylake-U/Kabylake-U Chipset Drivers 2. Click Intel(R) PRO LAN Network Drivers.. 3. When the Welcome screen appears, click Next to continue. 4. Accept the license agreement and click Next to continue. AMS300 / 301 / 302 User Manual... - Page 55 5. Tick the checkbox for Drivers to select the related drivers and click Next. 6. When the wizard is ready for installation, click Install. 7. The driver has been completely installed. You are suggested to restart the computer for changes to take effect. AMS300 / 301 / 302 User Manual...
-
Page 56: Intel Management Engine Driver Installation
3. When the Welcome screen appears, click Next to continue. 4. Accept the licence agreement and click Next to continue. 5. The driver has been completely installed. You are suggested to restart the computer for changes to take effect. AMS300 / 301 / 302 User Manual... -
Page 57: Usb 3.1 Driver Installation
Driver Installation 3.7 USB 3.1 Driver Installation 1. Click Intel and then Intel(R) Skylake-U/Kabylake-U Chipset Drivers. 2. Click ASMedia USB 3.1 Drivers. 3. When the Welcome screen appears, click Next to continue. AMS300 / 301 / 302 User Manual... - Page 58 4. Accept the licence agreement and click Next to continue. 5. The driver has been completely installed. You are suggested to restart the computer for changes to take effect. AMS300 / 301 / 302 User Manual...
-
Page 59: Chapter 4 Bios Setup
Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Security Settings •... -
Page 60: Introduction
These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. AMS300 / 301 / 302 User Manual... -
Page 61: Main Settings
BIOS Setting Description System Date Sets the date. Use the <Tab> key to switch between the data elements. System Time Set the time. Use the <Tab> key to switch between the data elements. AMS300 / 301 / 302 User Manual... -
Page 62: Advanced Settings
F81846 Super IO Displays super IO chip parameters. Configuration F81846 Hardware Shows super IO monitor hardware status. Monitor CSM Configuration Enables / Disables option ROM execution settings, etc. USB Configuration Displays USB configuration parameters. AMS300 / 301 / 302 User Manual... -
Page 63: Cpu Configuration
Enables / Disables AES (Advanced Encryption Standard). Intel Trusted Execution Enables / Disables unilization of additional Technology hardware capabilities provided by Intel(R) Trusted Execution Technology. Changes require a full power cycle to take effect. AMS300 / 301 / 302 User Manual... -
Page 64: Power & Performance
CPPC v2 interface to allow for hardware controlled P-states. Turbo Mode Enables / Disables processor Turbo Mode (requires EMTTM enabled too). “Auto” means enabled unless max turbo ratio is bigger than 16-SKL A0 W/A. AMS300 / 301 / 302 User Manual... -
Page 65: Pch-Fw Configuration
Description AMT BIOS Features When disabled AMT BIOS features are no longer supported and user is no longer able to access MEBx Setup. Note: This option does not disable manageability features in FW. AMS300 / 301 / 302 User Manual... -
Page 66: Acpi Settings
(OS/S4 Sleep State). This option may not be effective with some OS. ACPI Sleep State Selects a ACPI sleep state for the system to enter. Options: Suspend Disabled, S3 (Suspend to RAM) AMS300 / 301 / 302 User Manual... -
Page 67: Ismart Controller
For example, if setting up a schedule from Wednesday 5 p.m. to Thursday 2 a.m., configure two schedule slots. But if setting up a schedule from 3 p.m to 5 p.m. on Wednesday, configure only a schedule slot. AMS300 / 301 / 302 User Manual... -
Page 68: F81846 Super Io Configuration
F81846 Super IO Configuration BIOS Setting Description Serial Port Configuration Sets Parameters of Serial Ports. You can enable / disable the serial port and select an optimal settings for the Super IO device. AMS300 / 301 / 302 User Manual... - Page 69 IO = 2E8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 F81846 Serial Port1 F81846 serial port 1 loop back / RS232 / Mode Select RS422 / RS485 model select. RS422/RS485 Enables / Disables RS422/RS485 termination. Termination AMS300 / 301 / 302 User Manual...
- Page 70 IO = 2F8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 • IO = 3E8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 • IO = 2E8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 AMS300 / 301 / 302 User Manual...
- Page 71 IO = 2E8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 • IO = 2F0h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 • IO = 2E0h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 AMS300 / 301 / 302 User Manual...
- Page 72 IO = 2E8h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 • IO = 2F0h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 • IO = 2E0h; IRQ = 3, 4, 5, 6, 7, 9, 10, 11, 12 AMS300 / 301 / 302 User Manual...
-
Page 73: F81846 Hardware Monitor
PC health status CPU Shutdown This field enables or disables the Shutdown Temperature Temperature Options: Disabled (default),. 70 °C, 75 °C, 80 °C, 85 °C, 90 °C, 95 °C AMS300 / 301 / 302 User Manual... -
Page 74: Csm Configuration
4.4.8 CSM Configuration BIOS Setting Description Network Controls the execution of UEFI and Legacy PXE OpROM. AMS300 / 301 / 302 User Manual... -
Page 75: Usb Configuration
Sets the time-out value 1, 5, 10 or 20 sec(s) for Control, Bulk, and Interrupt transfers. Device reset time-out Sets the seconds (10, 20, 30, 40 secs) of delaying execution of start unit command to USB mass storage device. AMS300 / 301 / 302 User Manual... - Page 76 The maximum time the device will take before it properly reports itself to the Host Controller. Auto uses default value. For a Root port, it is 100 ms. For a Hub port, the delay is taken from Hub descriptor. AMS300 / 301 / 302 User Manual...
-
Page 77: Chipset Settings
BIOS Setup 4.5 Chipset Settings BIOS Setting Description System Agent (SA) System Agent (SA) parameters Configuration VT-d Enables / Disables VT-d capability. AMS300 / 301 / 302 User Manual... -
Page 78: Pch-Io Configuration
BIOS Setting Description SATA and RST SATA device options and settings Configuration PCH LAN Controller Enables / Disables onboard NIC. Wake on LAN Enable Enables / Disables integrated LAN to wake the system. AMS300 / 301 / 302 User Manual... - Page 79 SATA Controller(s) Enables / Disables the Serial ATA. SATA Mode Selection Determines how SATA controller(s) works. AHCI Mode or Intel RST Premium. Serial ATA Port 0~2 Enables / Disables Serial Port 0 ~ 2. AMS300 / 301 / 302 User Manual...
-
Page 80: Security Settings
4.6 Security Settings BIOS Setting Description Administrator Password Sets an administrator password for the setup utility. User Password Sets a user password. AMS300 / 301 / 302 User Manual... -
Page 81: Boot Settings
Has no effect for BBS boot options. Boot mode select Selects a Boot mode, Legacy / UEFI. Boot Option Priorities Sets the system boot order priorities for hard disk, CD/DVD, USB, Network. AMS300 / 301 / 302 User Manual... -
Page 82: Save & Exit Settings
Restores / Loads defaults values for all the setup options. Save as User Defaults Saves the changes done so far as user defaults. Restore User Defaults Restores the user defaults to all the setup options. AMS300 / 301 / 302 User Manual... -
Page 83: Appendix
Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. • I/O Port Address Map • Interrupt Request Lines (IRQ) • Watchdog Timer Configuration... -
Page 84: I/O Port Address Map
Motherboard resources 0x0000164E-0x0000164F Motherboard resources 0x00000020-0x00000021 Programmable interrupt controller 0x00000024-0x00000025 Programmable interrupt controller 0x00000028-0x00000029 Programmable interrupt controller 0x0000002C-0x0000002D Programmable interrupt controller 0x00000030-0x00000031 Programmable interrupt controller 0x00000034-0x00000035 Programmable interrupt controller 0x00000038-0x00000039 Programmable interrupt controller AMS300 / 301 / 302 User Manual... - Page 85 PCI Express Root Complex 0x00000D00-0x0000FFFF PCI Express Root Complex 0x0000F0A0-0x0000F0A7 Intel(R) Active Management Technology - SOL (COM5) 0x0000F000-0x0000F03F Intel(R) HD Graphics 630 0x000003B0-0x000003BB Intel(R) HD Graphics 630 0x000003C0-0x000003DF Intel(R) HD Graphics 630 0x0000FF00-0x0000FFFE Motherboard resources AMS300 / 301 / 302 User Manual...
- Page 86 Address Device Description 0x0000F040-0x0000F05F Intel(R) 100 Series/C230 Series Chipset Family SMBus - A123 0x00000060-0x00000060 Standard PS/2 Keyboard 0x00000064-0x00000064 Standard PS/2 Keyboard AMS300 / 301 / 302 User Manual...
- Page 87 Intel(R) I211 Gigabit Network Connection IRQ 4294967289 Intel(R) I211 Gigabit Network Connection IRQ 4294967290 Intel(R) USB 3.0 eXtensible Host Controller - 1.0 (Microsoft) IRQ 4294967291 Intel(R) HD Graphics 630 IRQ 4294967292 Intel(R) Ethernet Connection (2) I219-LM AMS300 / 301 / 302 User Manual...
- Page 88 Level Function IRQ 4294967293 Standard SATA AHCI Controller IRQ 4294967294 Intel(R) 100 Series/C230 Series Chipset Family PCI Express Root Port #6 - A115 AMS300 / 301 / 302 User Manual...
- Page 89 81866 watch dog program\n"); SIO = Init_F81866(); if (SIO == 0) printf("Can not detect Fintek 81866, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); AMS300 / 301 / 302 User Manual...
- Page 90 Set_F81866_LD(0x07); //switch to logic device 7 bBuf = Get_F81866_Reg(0xFA); bBuf &= ~0x01; Set_F81866_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_F81866_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_F81866_Reg(0xF5, bBuf); //disable WDT //--------------------------------------------------------------------------- AMS300 / 301 / 302 User Manual...
- Page 91 Init_Finish; } F81866_BASE = 0x00; result = F81866_BASE; Init_Finish: return (result); //--------------------------------------------------------------------------- void Unlock_F81866 (void) outportb(F81866_INDEX_PORT, F81866_UNLOCK); outportb(F81866_INDEX_PORT, F81866_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81866 (void) outportb(F81866_INDEX_PORT, F81866_LOCK); //--------------------------------------------------------------------------- void Set_F81866_LD( unsigned char LD) Unlock_F81866(); AMS300 / 301 / 302 User Manual...
- Page 92 #define F81866_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81866_UNLOCK 0x87 #define F81866_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81866(void); void Set_F81866_LD( unsigned char); void Set_F81866_Reg( unsigned char, unsigned char); unsigned char Get_F81866_Reg( unsigned char); //--------------------------------------------------------------------------- #endif // F81866_H AMS300 / 301 / 302 User Manual...
Need help?
Do you have a question about the AMS300 and is the answer not in the manual?
Questions and answers