Connecting The 3D Woofer - Sony Trinitron KV-XA21 Operating Instructions Manual

Connecting the 3D WOOFER

You can enjoy high quality sound by connecting the 3D WOOFER.
1
Corner A
1
Align the front of the 3D WOOFER to corners A and B of your TV. Place the
3D WOOFER into the footholds and adjust it until it is stable.
2
Connect the wires to the 3D WOOFER (8Ω) terminals at the rear of your TV.
The red wire should be connected to the 3 red terminal and the black wire
to the # black terminal.
6
Using Your New TV
3D WOOFER
Corner B
WOOFER (8 )
– +
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring 3D WOOFER terminal.
2
WOOFER (8 )
–
Black
wire
+
Red
wire