Page 1
M773LW3 Gem Series Soundshield Assembly Instructions Corporate Headquarters Alaska Branch Office Southeastern U.S.A. East Coast Branch Gulf Branch 4420 14th Avenue NW 1200 West International 1419 W Newport Center Dr 15 Aegean Dr. 19 Veterans Memorial Blvd. Seattle, WA 98107...
Page 3
M773LW3 GEM SERIES SOUND SHIELD ITEM DESCRIPTION NLI P/N NOTES JUNCTION BLOCK OFF PLATE ASSEMBLY 06-78632 REAR PANEL ASSEMBLY 06-78602 1/4-20 x 3/4” HEX HEAD CAPSCREW, S/S 12-30111 1/4” EXTERNAL STAR WASHER, S/S 15-09103 REAR BOTTOM VALENCE ASSEMBLY 06-78608 BOTTOM SIDE VALENCE ASSEMBLY...
Page 4
Prior to assembly, inspect all components for damage. Report any damage to the shipping company. Check the packing list in the back of this manual to be sure all parts are included. Note: The Generator set features a single point lifting eye. However, the generator may still possess original factory lifting points, which will need to be loosened and rotated down, until they are below the highest point of the engine.
Page 6
You may encounter some resistance as the rear panel comes into contact with the intake air snorkel hose. Note that the rear panel has a small hole in the vicinity of the intake snorkel. Guide this hose so that it is inserted within the panel hole, ensure that the hose does not go too far into the rear panel so that the hose end is blocked.
Need help?
Do you have a question about the M773LW3 and is the answer not in the manual?
Questions and answers