6.
INSTALLATION
6.1 BDA Installation & Gain Setup
INSTALLATION
1 Install the BDA in a standard 19" rack. The BDA should be placed in a location where
the interconnect cables (i.e. fiber, RF and serial cable) can be easily installed and not
susceptible to damage. If the BDA is not installed in a controlled environment, a 5U high
space should be located above and below the unit for airflow.
DWG NO:
Error! Not a valid link.
INTENTIONALLY LEFT BLANK
400/800 MHz Fiber Optic & RF Fed Bi-Directional
Wireless Innovations Group
2601 Telecom Parkway
Richardson, Texas 75082
Rev:
Error!
Not a
valid
link.
Amplifier Operations / Maintenance Manual
Date:06/16/2004
61 of 63
Page: