The 480 MHz, low isolation duplexer provides the band selectivity and isolation
for the Uplink and the Downlink frequency. The duplexer is based on 4 ceramic
coaxial resonators design and is aligned carefully during production to optimize
the insertion loss, isolation, and VSWR
The duplexer is a fully passive device and should have an extremely long trouble-
free working life and requires no maintenance. Should the duplexer be suspect of
failure, the entire duplexer module should be replaced.
5.3.2 Specification
PARAMETER
Frequency Range: Downlink
Passband Insertion Loss
Passband VSWR
Impedance
Power Handling
Downlink-To-Uplink Isolation
Uplink-To-Downlink Isolation
Operating Temperature
5.3.3
Photograph
5.4 800 MHz EO Cell Amplifier Module (AE04A-D1265-001)
5.4.1 Description
DWG NO:
Error! Not a valid link.
Uplink
400/800 MHz Fiber Optic & RF Fed Bi-Directional
Wireless Innovations Group
2601 Telecom Parkway
Richardson, Texas 75082
Rev:
Error!
Not a
valid
link.
SPECIFICATION
483.1375 – 483.2625 MHz
486.1375 – 486.2625 MHz
3.5 dB
< 1.2:1
50 Ohms
5 Watt
> 50 dB @ Receive Port
> 55 dB @ Transmit Port
-20°C to +60°C
Amplifier Operations / Maintenance Manual
Date:06/16/2004
28 of 63
Page: