Table of Contents
Advertisement
Composite Input Power
Impedance
VSWR
2
OIP3
Noise Power max. @ 48dB Gain
AC Power
Notes:
1.Via Front Panel RS232 Connector.
2. Two-Tone Intermodulation: Measured two-output carriers at +23.5 dBm/C (+16.8
dBm/C for RF Fed BDA) in the 866 – 869 MHz band, with a BDA gain setting of 48 dB.
3.2.4 800 MHz Bi-directional Amplifier Uplink Specification
PARAMETER
Operating Frequency Range
Pass Bandwidth
Gain Typical
Output Gain Adjustment
Composite Output Power
Composite Input Power
(With ALC Activated)
Impedance
VSWR
2
OIP3
Noise Power max. @ 48 dB Gain
AC Power
Notes:
1.Via Front Panel RS232 Connector.
2. Two-Tone Intermodulation: Measure at two-input carriers of -48 dBm/C (-30 dBm/C
for RF Fed BDA) in the 821 – 824 MHz band, with a BDA gain setting of 48 dB.
3.3 Mechanical Specifications
PARAMETERS
RF Connectors
RS232 Connector
Mounting Configuration
Dimensions Typical (HxWxD)
Cooling
Chassis Stud
DWG NO:
Error! Not a valid link.
-18 dBm max.
50 Ohms
2:1
+44 dBm
-64 dBm/Hz (-110 dBm/Hz; RF Fed BDA)
120 VAC Single Phase
821 – 824 MHz
3 MHz
48 dB
1
30 dB
+5 dBm max.
-14 dBm max.
2:1
+ 26 dBm (+44 dBm; RF Fed BDA)
120 VAC Single Phase
400/800 MHz Fiber Optic & RF Fed Bi-Directional
Wireless Innovations Group
2601 Telecom Parkway
Richardson, Texas 75082
Rev:
Error!
Not a
valid
link.
UPLINK SPECIFICATION
50 Ohms
-110 dBm/Hz
SPECIFICATION
Type-N Female
D-Sub, 9 pin
19.0 inch Rack Mount
6.4 in. x 19.0 in. x 15.8 in.
Convection, External Heatsink
Ground
Amplifier Operations / Maintenance Manual
Date:06/16/2004
11 of 63
Page:
Advertisement
Table of Contents
