Log; Options During A Video Call; Call Timers - Nokia N80 User Manual

Send touch tones—to send touch tone strings, for
example, a password. Enter the touch tone string or
search for it in Contacts. To enter a wait character (w) or
a pause character (p), press
send the tone.
Tip! You can add touch tones to the
or Touch tones

Options during a video call

FCC Draft
Select Options during a video call for the following
options: Enable or
Activate handset
connectivity is attached) or
compatible headset with Bluetooth connectivity is
attached), Activate
standby, Use main camera/Use secondary
Change image order,
The available options may vary.

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press
Recent calls. The device registers missed and received
66
repeatedly. Select
Phone number
fields in a contact card.
Disable (video, audio, or both),
(if a compatible headset with Bluetooth
Activate handsfree
loudsp., End active call, Open active
camera,
Zoom in/Zoom out, and Help.
, and select My own
calls only if the network supports these functions, the
device is switched on, and within the network service area.
To clear all recent call lists, select
OK to
calls in the recent calls main view. To clear one of the call
logs, open the register you want to erase, and select
Options > Clear
register, scroll to the event, and press

Call timers

To monitor the approximate duration of your incoming and
outgoing calls, press
timers.
(when a
To set the display of the call timers while a call is active,
select My own
duration > Yes
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code. See 'Phone and
SIM', p. 99.
Packet data
> Log>
To check the amount of data sent and received during
packet data connections, press
Options >
list. To clear an individual event, open a
.
, and select My own
> Log> Options > Settings
or No.
Options
, and select
Clear recent
> Log> Call
> Show call
> Clear
My own >