Whittier Wood 7018GDRC Assembly Instructions

Model #
7018GDRC
Northgate
8-Drawer Dresser
Glazed Dark Chestnut finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, contact Whittier Wood Products customer service
department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
•
For normal household use only. Not recommended to
use in a commercial setting.
•
Do not climb, sit or stand on this piece of furniture.
•
Do not overload the drawers.
•
Unload items before you move this unit.
•
Before you load or move this unit, tighten all screws
and supports.
• Before you begin your project, completely read the
Assembly Instructions.
• Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
• Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
• Place heaviest items in the bottom drawers.
• Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
• Never allow children to climb or hang on drawers,
doors or shelves.
• Never open more than one drawer at a time.
Properly installing tip-over restraints may reduce but
not eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery
Production Code:
VN
WARNING
08/11