MotorGuide Pinpoint Setup Instructions page 8

Xi5 Motor Upgrade Process
5. Once Update 2 is complete, you will be prompted to disconnect the
power from the trolling motor for 5 seconds then reapply power.
• Please follow the on-screen prompts and only disconnect power
from the trolling motor when prompted to do so.
• Do not power off the HDS unit or the NMEA 2000
during the update process.
6. After the power off/on cycle is complete, you will be prompted
with "Trolling Motor Update is completed." Press OK to continue
installation.
8
ON-SCREEN
® network