Advertisement
Xi5 Motor Upgrade Process
2. You will be prompted to disconnect the power from the trolling
motor for 5 seconds then reapply power. This will initiate the motor
update.
IMPORTANT: Only remove power from the trolling motor and not
from the HDS unit performing the update or the NMEA 2000
network. The power cycle (on/off) of the trolling motor is what
starts the update. The HDS and the NMEA 2000 network need to
remain powered on to begin loading the software when the motor
powers on.
5
ON-SCREEN
®
Advertisement
Need help?
Do you have a question about the Pinpoint and is the answer not in the manual?
Questions and answers
Hello....I purchased a 24 v motor guide trolling motor with the pinpoint graft system with the three transducer conceld in the head of the motor from cables. Were is the best place to have it gone over. As far as being services it's a2006 model
You can find service for a 2006 MotorGuide trolling motor with the Pinpoint graft system at any MotorGuide authorized service dealer. Do not return it to the place of purchase unless they are an authorized service center. If returning by mail, package it carefully and include a note describing the issue, your address, phone number, and proof of purchase, such as a receipt or registration verification. Warranty claims require proof of purchase.
This answer is automatically generated