Advertisement
The purpose of this manual is to explain correct way how to integrate module DWM-W091 to the end
product.
It includes procedures that shall assist you to avoid unforeseen problems. This manual
presents information that shows how module and OEM product, where module integrated, complies
with regulations in certain regions. Any modifications, not expressly approved by the manufacturer
could void the authority to operate in these regions.
Content
1. General
1. General
This MITSUMI Wireless LAN Bluetooth Combo Module, model DWM-W091 has to be installed and
used in accordance with the technical description/installation instructions provided by the
manufacturer.
For detail information concerning type approval of this module (e.g. where this module is already
pre-approved) please contact the authorized local distributor or manufacturer.
The system may only be implemented in the configuration that was authorized. Note that any
changes or modifications to this equipment not expressly approved by the manufacturer could void
the user's authority to operate this equipment.
This material may not in whole or part be copied, stored electronically or communicated to third parties
User Manual
MITSUMI Wireless LAN Bluetooth Combo Module
MODEL DWM-W091
COMMERCIAL IN CONFIDENCE
without MITSUMI ELECTRIC CO., LTD's prior agreement in writing.
Page 1 of 6
DWM-W091_User_Manual
Advertisement
Table of Contents
Related Manuals for Mitsumi DWM-W091
Summary of Contents for Mitsumi DWM-W091
- Page 1 MITSUMI Wireless LAN Bluetooth Combo Module MODEL DWM-W091 The purpose of this manual is to explain correct way how to integrate module DWM-W091 to the end product. It includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that shows how module and OEM product, where module integrated, complies with regulations in certain regions.
-
Page 2: Product Information
Page 2 of 6 DWM-W091_User_Manual Product Information DWM-W091 is a Wireless LAN Bluetooth Combo Module and 1×1 SISO method is supported. The specification is shown in the following. DC 3.1V to 4.2V(3.3V Typ) Power Supply DC 1.62V to 1.92V(1.8V Typ) Carrier Frequency USA/Canada 2.412GHz to 2.62GHz... - Page 3 Labelling. MITSUMI Wireless LAN Bluetooth Combo Module DWM-W091 labelled as below. FCC ID: EW4DWMW091 The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible when the module is installed into the system, “Contains FCC ID: EW4DWMW091”...
- Page 4 Labelling. MITSUMI Wireless LAN Bluetooth Combo Module DWM-W081 labelled as below. IC: 4250A-DWMW091 The proposed with IC ID label format is to be placed on the module. If IC ID is not visible when the module is installed into the system, “Contains IC: 4250A-DWMW091”...
- Page 5 This device must not be co-located or operating in conjunction with any other antenna or transmitter. 5. Taiwan NCC 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。 Labelling. MITSUMI Wireless LAN Bluetooth Combo Module DWM-W081 labelled as below. “Contains NCC ID: CCXXXXYYYYYZZW” 根據低功率電波輻射性電機管理辦法 第十二條：「經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變...
- Page 6 Page 6 of 6 DWM-W091_User_Manual Europe-EU Declaration of Conformity and Restrictions Hereby, MITSUMI declares that this Mitsumi 802.11n WLAN module DWM-W081 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment is marked with the symbol and can be used throughout the European community.
Need help?
Do you have a question about the DWM-W091 and is the answer not in the manual?
Questions and answers