Sample Rate - 360 Systems Shortcut 99 Owner's Manual

Rear Panel Features
Connecting to Telephone Control Systems
Recording and editing telephone calls is made quick and easy by connecting a Shortcut
directly to the two most popular digital telephone hybrid systems. Both systems allow you to:
• Instantly open a new Shortcut file and start recording from the hybrid's desktop
switch control console.
• Record a single call to a single file
• Record multiple calls to a single file
• From the Shortcut you can either accept the default file name or put your own
custom label on each file
Several popular systems are supported:
Gentner: Model TS-612 On Air Phone System.
Telos: Model 1A2 Multiline Telephone System, Model One-X-Six Talk Show System,
and the Direct Interface Module.
Audio connection to each product is different. Refer to your Telos or Gentner owner's
manual for suggestions. Below are the diagrams for the necessary control interface cable from
the telephone interface to the Short/cut GPI connector.
CONTROL INTERFACE WIRING FOR TELEPHONE CONTROL
Using External Sample Rate Synchronization
In order to use Shortcut with some digital mixers, routers, and multi-track recorders, it is
necessary to reference its sample rate to an outside source. This is accomplished by connecting
a digital audio signal from another unit that is to be the reference or is also synchronized to the
reference.
Shortcut Audio Editor Owner's Manual
Shortcut
Gentner
Ground
9
1
Play
1 5
Stop
4 6
Record
5 7
DB9M DB15M
Gentner
Telos Shortcut
Ground
6 1
Record
7
7
Stop
6
8
DB9M
DB15M
Telos
Page 19