Location Considerations - Johnson Controls VG1xA5Gx Installation Instructions Manual

Mounting

Location Considerations

IMPORTANT: Protect the actuator from dripping
water, condensation, and other moisture. Water or
moisture could result in an electrical short, which
may damage or affect the operation of the actuator.
IMPORTANT: Do not cover the actuator with
thermal insulating material. High ambient
temperatures may damage the actuator, and a hot
water pipe, a steam pipe, or other heat source may
overheat it.
Figure 10: Typical VG1000 Series Flanged Ball Valves Piping Application
Note: Mount the valve downstream from the coil to minimize heat transfer to the actuator.
Typical Two-Way Ball Valve Application
Typical Three-Way Ball Valve Application
VG1000 Series Flanged Ball Valves Installation Instructions
Piping
Be sure to wire the input lines to the electric actuator
correctly for the valve to move in the proper direction.
See Figure 10 for typical two- and three-way piping
configurations.
IMPORTANT: Use copper conductors only. Make
all wiring connections in accordance with local,
national, and regional regulations. Do not exceed
the actuator's electrical ratings.
VG124x Two-Way Valve
Port A Port B
VG184x Three-Way Valve
Port A Port C
Port B
6
Return
Supply
Return
Supply