Chicco MyFit Harness+Booster User Manual page 27

INSTALL USING LATCH
Do not use the LATCH anchors of the Child Restraint anchorage system
with the internal harness of the child restraint when restraining a child
weighing more than 40 lbs (18.1 kg). Always use the Top Tether.
When installing with LATCH in vehicle equipped with inflatable seat
belts, the unused seat belt should NOT be buckled behind the Child
Restraint System as this will engage the inflatable portion of the belt.
If LATCH anchors are out and in correct position skip to Step 6 (pg
1
54). Undo the snap attaching the Armrest Fabric to the Backrest Seat
Pad. Repeat this step for the other side.
2
Pull forward on the Seat Bottom Pad and lift up on the Backrest Seat
Pad to locate the LATCH Storage Compartment.
3
Open the compartment door and remove LATCH straps.
50
1 2
INSTALL USING LATCH
3
51