Chicco MyFit Harness+Booster User Manual page 26

HARNESS SETUP
With the Child Restraint facing forward on selected vehicle seat; make
5
sure it is not blocking the vehicle belt buckle. Lay Tether Strap over
the back of the vehicle seat.
Installation on a Level Surface: Locate the Bubble Level Indicator
6
label and re-adjust the seat recline to any position that the Bubble
falls between the lines.
LEVEL
Installation on a Slope: If vehicle is on a slope, adjust the seat
recline to position 3 or position 4 only.
LEVEL
7
Check to make sure the install line has remained parallel to the vehicle
seating surface (see step 3 pg. 47).
Installation Options:
• LATCH installation continued on page 50.
• Lap-Shoulder Belt installation continued on page 58.
• Lap Belt Only installation continued on page 64.
48
5
6
L E V E L
HARNESS SETUP
L E V E L
6
49