Hardware Description; Front Panel - Planet FGSD-1011HP User Manual

2. Hardware Description

The switch provides three different running speeds – 10/100/1000Mbps, and
automatically distinguishes the speed of the incoming connection.
This section describes the hardware features of the FGSD-1011HP. For easier
management and control of the FGSD-1011HP, familiarize yourself with its display
indicators and ports. Front panel illustrations in this chapter display the unit LED
indicators. Before connecting any network device to the FGSD-1011HP, please read
this chapter carefully.

2.1 Front Panel

The front panel of the FGSD-1011HP PoE+ Ethernet Switch consists of 8 auto-
sensing 10/100Mbps Ethernet RJ45 ports, 1 auto-sensing 10/100/1000Mbps
Ethernet RJ45 port and 1 auto-sensing 10/100/1000 Mbps SFP port. The LED
indicators are also located on the front panel of the FGSD-1011HP.
2 4 6
PoE
PWR
1 3 5
PoE
FGSD-1011HP
The front panel of the FGSD-1011HP provides one DIP switch for Standard, VLAN
and Extend mode selections. The detailed descriptions are shown in the following
table.
DIP Switch Mode
Standard
VLAN
Extend
Standard
VLAN
Extend
2
LNK ACT
8
PoE In-Use
LNK ACT
7 9 10
1000
Gigabit Standard
VLAN
1
Extend
Figure 2-1: FGSD-1011HP Switch Front Panel
This mode makes the FGSD-1011HP operate as a general
switch and all PoE ports operate at 10/100Mbps auto-
negotiation.
This mode makes the FGSD-1011HP operate as a VLAN
isolation switch and
1. Port 1 to port 8 will isolate respectively.
2. Port 1 to port 8 can only communicate with port 9 and port
10 (uplink port).
4 6 8
8-Port 10/100TX 802.3at PoE+1-Port Gigabit+
3 5 7 9
Function
1-Port Gigabit SFP Desktop Switch
Uplink 10
9