Table of Contents
Advertisement
Assembly instructions | LK Electric Boiler 11-n
Control panel / Heating settings
Front panel
1.
Temperature and manometer: Show boiler temperature / temperature of the outgoing water as well as heating system's
pressure.
2.
Main switch: Switches on and off all voltage to boiler.
3.
Resetting of overheating (push hard to reset).
4.
Operation indication: Lights up when boiler is switched on.
5.
Selector switch, Program selection:
standby position: , recommended before turning main switch to position O, if the purpose is to switch off
the boiler. Heating system needs to be filled with water. The circulation pump is set in motion and protection
against freezing is activated when the boiler temperature falls below 10 °C.
normal operation: , see item 14.
alternative operation:, see item 13.
6.
Adjusting: The heat graph can be moved in parallel ±10 °C. When calculated in degrees, the room temperature chan-
ges by approximately half as much as the temperature of the outgoing water. If you need a major change in tempera-
ture, select another heating graph, see item 14.
7.
Indicator for Output Group 1.
8.
Indicator for Output Group 2.
9.
Indicator for Output Group 3.
10.
Status indicator:
EN.33.C.94.1702
10 (15)
1
4
2
3
6
7
8
9
5
10
Advertisement
Table of Contents
