Table of Contents
Advertisement
2. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display.
3. Engage reverse gear and back up slowly.
4. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display.
The function will switch off automatically and a
graphic and message will appear to indicate that
parking has been completed. Adjustments can
always be made be the driver afterward. Only the
driver can determine when the vehicle is correctly
parked.
CAUTION
The warning distance is shorter when the
sensors are used by PAP compared to when
they are used by the Parking Assist system.
Related information
•
Park Assist Pilot* (p. 389)
Leaving a parking space with Park
Assist Pilot
Park Out
The function
can also help the driver
to leave a parking space.
NOTE
Leaving a parking space with the
function should only be used in connection
with parallel parking – it does not work for
perpendicular parking.
The
Park Out
vated in the center display's
Function view or in Camera
view.
To do so:
1. Tap
Park Out
in Function view or in Camera
view.
2. Move the gear selector to the suitable posi-
tion (e.g. D or R) for the direction in which
you will be pulling out of the parking space.
3. Be prepared to stop the vehicle when
instructed to do so by a graphic and mes-
sage in the center display. Follow the instruc-
tions in the same way as for the parking pro-
cedure.
Note that the steering wheel can "spring" back
when the procedure is completed and the driver
may need to turn the steering wheel back to the
maximum position in order to pull out of the park-
ing space.
If PAP determines that the driver can pull out of
the parking space without any extra maneuvers,
the function will be deactivated, even if it seems
Park Out
as though the vehicle is not completely out of the
parking space.
Related information
•
Park Assist Pilot* (p. 389)
function is acti-
DRIVER SUPPORT
393
* Option/accessory.
Advertisement
Table of Contents
